A jigsaw splinterguard is a small insert fitted around the blade opening to support fibers near the kerf. It is different from the long adhesive strip fitted to a track-saw rail. The insert must match the saw’s base and the blade arrangement.
These five products are jigsaw anti-splinter inserts or replacement packs. Several replace the same original part through different manufacturers or pack sizes, so choose by part number and tool compatibility rather than treating each pack as a new insert design.
Quick Answer
Best Bosch-Compatible Multipack: SG Store 10Pcs Anti-Splinter Guards 2607010079. Selected Bosch GST and PST models. 10 plastic inserts
Best Genuine DEWALT Multipack: DeWalt DC330/DCS331 Anti-Splinter Plate Guides. DC330 and DCS331 series. Three-pack
Best OEM DEWALT Single Replacement: OEM 402140-00 Replacement Anti-Splinter Device. Listed DC, DW, and DCS models. Replacement insert
Best Jigsaw Splinter Guards Comparison Table
| Product | Best For | Specifications / Compatibility | Key Features |
|---|---|---|---|
| SG Store 10Pcs Anti-Splinter Guards 2607010079 | Best Bosch-Compatible Multipack | Selected Bosch GST and PST models | 10 plastic inserts |
| DeWalt DC330/DCS331 Anti-Splinter Plate Guides | Best Genuine DEWALT Multipack | DC330 and DCS331 series | Three-pack |
| OEM 402140-00 Replacement Anti-Splinter Device | Best OEM DEWALT Single Replacement | Listed DC, DW, and DCS models | Replacement insert |
| Sonayiu 2601016065 Replacement Jigsaw Anti-Splinter Guard | Best Listed Bosch Replacement | TST8000E, GST700, GST90BE, GST25M | Replacement part |
| Nxvsayy 2601016065 Jigsaw Anti-Splinter Guard | Best GST700/GST800 Replacement | GST800, GST700, GST90BE, GST25M | Replacement part |
1. SG Store 10Pcs Anti-Splinter Guards 2607010079 — Best Bosch-Compatible Multipack
The SG Store set is the most practical direct match for Bosch-compatible jigsaw owners who want several replacement inserts on hand. The listed part number is 2607010079, and the compatibility information names GST800, GST65, GST85, PST650L, PST680E, PST680 EL, PST700 PE, and PST800 PEL models among others. That makes the part number more useful than the generic “anti-splinter guard” wording on the listing.
Each guard is made from plastic described as resistant to wear and heat, and the inserts are intended to be installed without special tools. A ten-piece supply suits a busy shop where small inserts can wear, crack, or disappear into a drawer full of offcuts. It is still a model-specific purchase. The transparent appearance does not establish compatibility, so compare the part number and exact jigsaw model before fitting one near the blade opening.
Pros
- Ten replacement guards provide a useful supply for repeated maintenance.
- Uses the documented 2607010079 part number.
- Listed for several Bosch GST and PST jigsaw models.
- Plastic construction is described as wear and heat resistant.
- Designed for replacement without special tools.
Cons
- Compatibility must be checked against the exact model and part number.
- It is not a universal guard for every Bosch or other-brand jigsaw.
This set makes the most sense for owners whose tool is listed under the 2607010079 compatibility reference. The quantity is its clearest advantage, especially for a workshop that cuts sheet goods regularly and wants a replacement ready before the existing insert becomes too loose or damaged. Buyers with a DeWalt, Makita, or unlisted Bosch model should skip it rather than rely on visual similarity.
To buy this product, click here.
2. DeWalt DC330/DCS331 Anti-Splinter Plate Guides — Best Genuine DEWALT Multipack
DeWalt owners often benefit from staying with a replacement identified for their tool family, and this three-pack is listed for the DC330 and DCS331 jigsaw lines. The product is described as a genuine DeWalt replacement part, which gives it a clearer brand relationship than the third-party alternatives in this roundup. For a user restoring an older jigsaw, that direct association can remove some uncertainty from the search.
The listing also advises consulting the owner’s manual for part-number identification and installation. That is sensible here because anti-splinter plates are small, model-specific pieces, and a close-looking insert may not sit correctly around the blade. The three-pack is enough for routine replacement without committing to a larger quantity, making it a focused choice for a DeWalt repair drawer.
Pros
- Listed as a genuine DeWalt replacement part.
- Designed for the DC330 and DCS331 jigsaw families.
- Three-piece format provides spare replacements.
- Suitable for owners seeking a brand-specific part.
- Listing directs buyers to verify the manual and part number.
Cons
- Compatibility is narrower than the broader 402140-00 listing.
- Installation and exact model matching still require manual verification.
This is the cleanest choice for a DC330 or DCS331 owner who prefers a genuine DeWalt-labeled replacement. It is less suitable for someone shopping by general dimensions or hoping to fit the plates to an unrelated jigsaw. Match the model before ordering, then treat the three-pack as a small maintenance supply rather than a universal accessory.
To buy this product, click here.
3. OEM 402140-00 Replacement Anti-Splinter Device — Best OEM DEWALT Single Replacement
This replacement uses the 402140-00 reference and lists a wide range of DeWalt jigsaws, including DC330B, DC330K, DW331K, DCS334P1, DC318K, DC308K, DCS331 variants, DCS335B, DW933, DW321, DW323, and DCS334B. That broad model list is the main reason it ranks ahead of narrower DeWalt-compatible choices for shoppers who have checked their exact tool against the listed compatibility information.
The listed dimensions are approximately 1.00 by 1.55 by 0.10 inches. Dimensions can help with identification, but they should not replace the part number or model check. A small insert needs to sit correctly in the baseplate and close to the blade path, so physical similarity alone is not enough. The product is described as a genuine OEM replacement, giving it a different purchasing angle from the non-OEM substitutes below.
Pros
- Uses the documented 402140-00 replacement reference.
- Lists numerous DeWalt DC, DW, and DCS models.
- Published approximate dimensions assist with part identification.
- Described as a genuine OEM replacement.
- Useful for repairing an existing DeWalt jigsaw rather than replacing the tool.
Cons
- The extensive model list still requires exact model verification.
- Only one replacement device is indicated in the product specifications.
Choose this option when your DeWalt model appears in the compatibility list and the 402140-00 reference matches your existing insert. It is especially appropriate for users maintaining several related DeWalt jigsaws, although the product specifications do not establish compatibility beyond the named models. A buyer who wants multiple spares may prefer a pack format, while a repairer seeking the documented part reference may value this focused replacement.
To buy this product, click here.
4. Sonayiu 2601016065 Replacement Jigsaw Anti-Splinter Guard — Best Listed Bosch Replacement
Sonayiu’s replacement is aimed at a specific group of jigsaws, including TST8000E, GST700, GST90BE, and GST25M. The listing identifies the part as 2601016065 and describes it as a non-OEM substitute intended to be functionally equivalent to the previous component. That distinction matters for buyers who want a replacement for a worn insert but do not specifically require a manufacturer-branded part.
The compact design is meant to save installation time, although the product specifications do not provide dimensions or a detailed installation procedure. This guard should therefore be treated as a model-matched repair component, not a universal plastic strip that can be trimmed to fit. A careful check of the model designation before ordering is the difference between a useful repair and an incompatible spare sitting in the toolbox.
Pros
- Uses the documented 2601016065 part reference.
- Lists compatibility with several GST and related models.
- Compact replacement format suits a focused repair.
- Described as durable and sturdy.
- Non-OEM status is stated clearly in the product information.
Cons
- It is not an OEM part according to the product specifications.
- Dimensions and broader compatibility are not specified.
This guard suits owners of the listed TST8000E, GST700, GST90BE, or GST25M models who have confirmed the 2601016065 reference. It may be a sensible substitute for a damaged original insert, but buyers seeking a manufacturer-branded component should look elsewhere. Since there is no stated universal fit, avoid using it as a generic replacement for an unlisted jigsaw.
To buy this product, click here.
5. Nxvsayy 2601016065 Jigsaw Anti-Splinter Guard — Best GST700/GST800 Replacement
Nxvsayy uses the same 2601016065 reference as the Sonayiu selection and lists GST800, TST8000E, GST700, GST90BE, and GST25M compatibility. The practical difference is the way this listing positions the component as a direct replacement intended to restore the machine’s working condition. For a jigsaw with a worn or damaged anti-splinter insert, replacing the small part can be more sensible than treating the entire base area as a lost cause.
The product information says it is made to meet original equipment specifications and is intended for straightforward replacement by experienced users. Those statements describe the design intent, not independent verification, so the exact model remains the deciding factor. Buyers comparing this guard with Sonayiu’s equivalent reference should focus on seller details, availability, and the compatibility entry rather than assuming the two listings are interchangeable across every tool.
Pros
- Uses the 2601016065 reference.
- Lists compatibility with GST800, GST700, and related models.
- Presented as a direct replacement component.
- Designed to restore a jigsaw with a worn or damaged guard.
- Installation is described as straightforward for experienced users.
Cons
- Check insert dimensions for the exact product configuration.
- Compatibility claims should be checked against the exact tool model.
This is a logical alternative for owners whose GST800 or GST700 appears in the compatibility list. It belongs in a repair kit, not a general accessory collection, because the part number and tool family do the real work here. If your jigsaw is unlisted or uses another anti-splinter reference, this product should be skipped until the correct part is identified.
To buy this product, click here.
Buying Guide
Match the original part number
Read the model and base information before ordering. A Bosch-compatible insert and a DEWALT device do not share the same interface.
Check blade and bevel restrictions
An insert needs the correct clearance around the fitted blade. Follow the saw instructions for blade type and whether the insert may be used during bevel cuts.
Keep the insert fresh
Replace a worn or damaged insert when the opening no longer supports fibers close to the blade. Fit a replacement according to the saw instructions.
Before changing tooth direction or adding an insert, review tooth direction and tear-out control for the face you want to protect.
Use the right blade too
A splinterguard complements a suitable sharp blade. It cannot compensate for forcing a dull blade through unsupported veneer.
Frequently Asked Questions
Will a guide-rail strip fit a jigsaw base?
No. A long adhesive rail strip serves a different interface from a jigsaw throat insert.
Do these inserts fit every Bosch or DEWALT saw?
No. Match the exact replacement part number and listed tool models.
Will an insert remove all tear-out?
It helps support the edge near the kerf, but blade choice, feed, material, and work support still affect the result.
Final Verdict
SG Store 10Pcs Anti-Splinter Guards 2607010079 is the best bosch-compatible multipack pick. Selected Bosch GST and PST models. 10 plastic inserts
For genuine dewalt multipack, consider DeWalt DC330/DCS331 Anti-Splinter Plate Guides. DC330 and DCS331 series. Three-pack
