Drywall and plasterboard create fine abrasive dust, so blade rating and the permitted cutting method matter as much as the saw. A fiber-and-plaster blade gives the teeth a clearer match to gypsum-based board than a general wood assortment.
These three carbide-tipped blade options are intended for fiber and plasterboard applications. The Bosch T141HM1 is the single-blade starting point, the CMT JT141HM-3 supplies replacements, and the longer CMT JT341HM-3 suits thicker work within its specification. Follow the saw instructions for use on dusty board materials.
Quick Answer
Best Single Carbide-Tipped Blade: BOSCH T141HM1. Fiber and plasterboard cutting
Best Three-Pack: CMT Orange Tool JT141HM-3. Fiber and plasterboard cutting
Best Longer Blade: CMT Orange Tool JT341HM-3. Fiber and plasterboard cutting
Best Jigsaw Blades for Drywall Comparison Table
| Product | Best For | Specifications / Compatibility | Key Features |
|---|---|---|---|
| BOSCH T141HM1 | Best Single Carbide-Tipped Blade | T-shank carbide-tipped blade | Fiber and plasterboard cutting |
| CMT Orange Tool JT141HM-3 | Best Three-Pack | T-shank carbide-tipped blade | Fiber and plasterboard cutting |
| CMT Orange Tool JT341HM-3 | Best Longer Blade | T-shank carbide-tipped blade | Fiber and plasterboard cutting |
1. BOSCH T141HM1 — Best Single Carbide-Tipped Blade
The BOSCH T141HM1 is aimed squarely at fast, coarse cutting in plaster, cement board, fiberglass, and plasterboard. Its listed cement-board range is 1-1/4 to 2-3/8 inches, which gives this single blade a different application emphasis from thinner-panel blades. The 6 TPI carbide-tipped teeth are suited to removing material quickly, so this is the blade to examine when the job involves rough openings or construction adjustments rather than a fine visible edge.
A 4-inch blade gives it a useful overall size for deeper work, but the published cutting range should guide the actual job. It is supplied as one blade, so there is no spare in the package if the edge becomes worn or damaged. A contractor handling occasional fiber cement cuts may appreciate the direct application label, while a homeowner tackling several sheets may prefer a multipack to avoid stopping midway through an installation.
Pros
- Listed specifically for cement board from 1-1/4 to 2-3/8 inches thick.
- 6 TPI carbide-tipped teeth support fast coarse cuts.
- Also specified for fiberglass and plasterboard.
- 4-inch blade size suits substantial cutting tasks.
- Useful for construction, renovation, and remodeling applications.
Cons
- Only one blade is included.
- Its coarse-cut focus may be less suitable for a highly finished visible edge.
Choose the T141HM1 for speed-oriented construction work where the cut will be covered, trimmed, or otherwise treated as an opening rather than a show surface. It is less appealing as a general replacement supply because the package contains a single blade. Confirm that the thicker material range matches your panel before starting, since the listing does not make this a universal blade for every fiber cement thickness.
To buy this product, click here.
2. CMT Orange Tool JT141HM-3 — Best Three-Pack
The CMT Orange Tool JT141HM-3 has one of the clearest matches to this roundup’s purpose. Its listed applications include fiber cement boards under 2 inches, plasterboard, fiberglass-reinforced plastic, epoxy, MDF, and HDF. That broad fiber-and-board range makes it a practical choice for a renovation day that moves from a cement panel opening to a plasterboard adjustment without requiring a completely different blade.
Its 6 TPI tooth pattern is aimed at practical material removal rather than delicate finish work, and the 2-61/64-inch cutting length gives the blade a defined working range for supported panels. Side-set teeth are listed as part of the design. The three-piece package is useful for abrasive work because fiber cement can be hard on cutting edges, although the product specifications do not establish a precise service life or guaranteed cut quality. Check your jigsaw’s shank requirement before ordering, then let the blade do the work with moderate feed pressure.
Pros
- Specifically listed for fiber cement boards under 2 inches.
- 6 TPI side-set tooth design suits practical material removal.
- Also covers plasterboard, fiberglass-reinforced plastic, epoxy, MDF, and HDF.
- 2-61/64-inch cutting length gives useful working reach.
- Three blades provide replacements for abrasive projects.
Cons
- The listed fiber cement application is limited to boards under 2 inches.
- The product information does not specify a universal shank claim, so jigsaw compatibility should be checked.
This is the easiest pick for shoppers who want one specialty blade package centered on fiber cement and related sheet materials. It suits straight openings, trimming, and general renovation cuts better than fine decorative work. Buyers cutting very thick material or seeking the smoothest possible edge may prefer a different blade design and should pay close attention to the panel thickness and cut finish required.
To buy this product, click here.
3. CMT Orange Tool JT341HM-3 — Best Longer Blade
The JT341HM-3 is another CMT specialty blade, but its dimensions and application range separate it from the shorter JT141HM-3. It has a 132 mm total length and a 110 mm cutting length, while the product information lists fiber cement panels under 80 mm, fiberglass and epoxy resins from 5 to 50 mm, plasterboard, Eternit, MDF, and HDF. That makes it worth a look for deeper panels where usable blade length deserves closer attention.
Welded carbide teeth and a 6 TPI configuration point toward practical straight cutting rather than fine scroll work. The listing also describes a straight-cut profile and T-shank interface. The long reach is useful only when the material, jigsaw, and blade clearance all allow it, so it should not be treated as an automatic substitute for a shorter blade. A three-piece package gives the installer spare blades for repeated panel work.
Pros
- Listed for fiber cement panels under 80 mm.
- 110 mm cutting length provides substantial working reach.
- Welded carbide teeth are specified for the blade.
- 6 TPI profile suits straight practical cuts.
- Three-piece T-shank package supports repeated project work.
Cons
- Its longer profile may be more blade than needed for thin panels or tight cutouts.
- The listing emphasizes straight cuts rather than small-radius curves.
This CMT option is a sensible choice for buyers who have already compared their panel thickness with the 110 mm cutting length and want extra reach. It is particularly relevant for thicker fiber cement and mixed fiber-resin materials. A shorter blade may offer easier control in shallow work, so shoppers cutting thin siding or small openings should compare the JT141HM-3 before choosing the longer format.
To buy this product, click here.
Buying Guide
Match the named material
Use a blade rated for the actual board, not just one that fits the clamp. Material-specific tooth construction matters in abrasive boards.
Use the guide to blade ratings for abrasive board and tile materials to separate material ratings and tool-approved applications.
Check usable length
The blade must clear the full thickness throughout its stroke. Overall length and usable cutting length are different measurements.
Support the edge and waste
Clamp and support the material with clearance below the blade. A supported exit helps prevent the last section from breaking away.
Use the correct speed and feed
Follow the blade and saw recommendations. A suitable sharp blade and deliberate feed are more useful than forcing the teeth through the work.
Frequently Asked Questions
Does T-shank fit every jigsaw?
No. It fits compatible T-shank clamps. Check an older or unusual saw before ordering.
Will any carbide blade cut this material?
No. Carbide construction alone does not define the application. Match the named material and thickness rating.
Can I use a longer blade to increase saw capacity?
No. Stay within the tool’s rated capacity and choose sufficient usable blade length for the workpiece.
Final Verdict
BOSCH T141HM1 is the best single carbide-tipped blade pick. Fiber and plasterboard cutting
For three-pack, consider CMT Orange Tool JT141HM-3. Fiber and plasterboard cutting
