Cutting metal with a jigsaw starts with controlled speed and a blade chosen for the exact material and thickness. Thin sheet needs enough teeth engaged to resist snagging, while profiles and thicker sections need suitable reach and support. The saw should let you maintain a deliberate feed without bouncing the shoe or forcing the blade.
These picks are jigsaw power tools with adjustable speed and blade action. The JS470E is a useful corded starting point, while cordless platform choices make short installation cuts more convenient. Fit a metal-rated blade and follow the tool’s capacity limits; the wood blade in a starter package is not a metal-cutting blade.
Quick Answer
Best Corded Starting Point: BOSCH JS470E. The dial and trigger help establish a deliberate start in supported sheet. Select a fine-tooth metal blade and straight action for thin metal rather than relying on aggressive orbital movement.
Best DEWALT Cordless Top Handle: DEWALT DCS334B. Trigger control is useful for short notches and intermittent installation cuts. Secure the metal so it cannot chatter, and use the speed dial to avoid an unnecessarily fast blade.
Best Broad Corded Speed Range: Makita JV0600K. The dial starts at 500 SPM, giving you useful room to tune a metal-cutting setup. Match the blade and feed to the alloy rather than using the same setting as softwood.
Best Jigsaws for Cutting Metal Comparison Table
| Product | Best For | Specifications / Compatibility | Key Features |
|---|---|---|---|
| BOSCH JS470E | Best Corded Starting Point | Corded, 7A | Variable speed; blade ejector; die-cast footplate |
| DEWALT DCS334B | Best DEWALT Cordless Top Handle | 20V MAX, bare tool | Brushless motor; trigger and dial; LED |
| Makita JV0600K | Best Broad Corded Speed Range | Corded, 6.5A | Tool-less blades; 500–3,100 SPM; vacuum port |
| BOSCH JS572EK | Best for Supported Blade Guidance | Corded, 7.2A | Precision Control II; LED; tool-free bevel |
| DEWALT DCS335B | Best DEWALT Barrel Grip | 20V MAX, bare tool | Barrel grip; brushless motor; LED |
| Makita XVJ02Z | Best LXT Brushless Option | 18V LXT, bare tool | Brushless motor; six-speed dial; tool-less blades |
| Makita 4350FCT | Best Corded Makita with Lighting | Corded, 6.3A | LED; electronic speed control; tool-less clamp |
| Milwaukee 2737B-20 M18 FUEL | Best for M18 Barrel-Grip Users | 18V M18, bare tool | Brushless barrel grip; six-speed dial; dust tube |
| BOSCH GST18V-50N | Best Bosch 18V Top Handle | 18V, bare tool | Brushless motor; 3,500 SPM; LED |
1. BOSCH JS470E — Best Corded Starting Point
The JS470E supplies a 7-amp corded motor in a top-handle body. A speed dial sets the upper range and the trigger controls the cut, giving you a deliberate start and flexible feed control. Four orbital settings let you change the blade action, and the tool-free T-shank system ejects the blade during a change. The die-cast footplate provides a firm base for panel work. A switchable blower clears the line when extraction is not connected, and the kit format includes a carrying case.
The dial and trigger help establish a deliberate start in supported sheet. Select a fine-tooth metal blade and straight action for thin metal rather than relying on aggressive orbital movement.
Pros
- 7-amp corded motor
- Dial and trigger control
- Four orbital settings
- Tool-free blade ejection
- Stable die-cast footplate
Cons
- Requires mains power and cord management
- Vacuum extraction requires a separate compatible attachment
The BOSCH JS470E is the best corded starting point in this comparison. Its variable speed; blade ejector; die-cast footplate make it worth considering when those features match your next project.
To buy this product, click here.
2. DEWALT DCS334B — Best DEWALT Cordless Top Handle
The DCS334B combines a top handle with a variable-speed trigger and a separate speed dial. That arrangement lets you set a working limit and ease into a cut without moving your grip. Its brushless motor runs up to 3,200 strokes per minute, and the four-position orbital selector changes the cutting action for different tasks. An LED illuminates the blade area, while the blower clears loose debris. The keyless clamp accepts T-shank blades, and the shoe has bevel detents at 0, 15, 30, and 45 degrees.
Trigger control is useful for short notches and intermittent installation cuts. Secure the metal so it cannot chatter, and use the speed dial to avoid an unnecessarily fast blade.
Pros
- Trigger and dial offer flexible speed control
- Brushless motor and 20V MAX platform
- LED and blower help reveal the line
- Keyless T-shank blade changes
- No-mar shoe cover protects finished surfaces
Cons
- Battery and charger are sold separately
- Top handle sits higher above the work than a barrel grip
The DEWALT DCS334B is the best dewalt cordless top handle in this comparison. Its brushless motor; trigger and dial; led make it worth considering when those features match your next project.
To buy this product, click here.
3. Makita JV0600K — Best Broad Corded Speed Range
The JV0600K is a 6.5-amp top-handle saw with a 500–3,100 strokes-per-minute dial. Three orbital settings plus straight cutting let you vary the action, while the counterweight mechanism helps moderate vibration. Its tool-less blade clamp makes it easier to move between wood and specialty blades during a project. The die-cast base gives the saw a useful support surface, and the through-body dust port connects to a compatible vacuum hose. It is a sensible corded step up for buyers who want speed adjustment and convenient blade changes without entering a battery platform.
The dial starts at 500 SPM, giving you useful room to tune a metal-cutting setup. Match the blade and feed to the alloy rather than using the same setting as softwood.
Pros
- 6.5-amp corded motor
- Broad variable-speed dial
- Tool-less blade changes
- Three orbital settings plus straight cutting
- Through-body vacuum port
Cons
- Power cord needs space around the work
- Vacuum hose is a separate purchase
The Makita JV0600K is the best broad corded speed range in this comparison. Its tool-less blades; 500–3,100 spm; vacuum port make it worth considering when those features match your next project.
To buy this product, click here.
4. BOSCH JS572EK — Best for Supported Blade Guidance
The JS572EK is Bosch’s top-handle Precision Control II option, using a 7.2-amp motor and a dual-roller blade guidance system. That guidance supports the blade near the cut, which is valuable when you need to keep a shaped edge square. A variable-speed range of 800–3,000 strokes per minute and four orbital positions give you room to tune the action. The die-cast footplate adjusts for bevels without a separate tool. LED lighting, a switchable blower, and blade ejection help keep routine setup and line following straightforward.
Dual-roller guidance is helpful when keeping the blade aligned through a longer cut. It does not replace a metal-rated blade or adequate support beneath a sheet.
Pros
- Dual-roller Precision Control II guidance
- 7.2-amp motor
- LED and switchable blower
- Tool-free bevel adjustment
- Tool-free T-shank blade ejection
Cons
- Corded operation limits movement away from an outlet
- Extraction kit and hose are separate accessories
The BOSCH JS572EK is the best for supported blade guidance in this comparison. Its precision control ii; led; tool-free bevel make it worth considering when those features match your next project.
To buy this product, click here.
5. DEWALT DCS335B — Best DEWALT Barrel Grip
The DCS335B places your hand around the motor housing rather than above it. Its barrel grip suits buyers who want to steer close to the shoe, particularly when following a shaped line. A speed dial controls the brushless motor up to 3,200 strokes per minute, and the four-position orbital selector lets you favor a cleaner action or faster wood cutting. The T-shank clamp releases blades without a separate tool. An LED, dust blower, and no-mar shoe cover round out a useful cutting package.
The low grip suits deliberate steering along a marked metal profile. Its speed dial lets you keep the action consistent without adjusting finger pressure throughout the cut.
Pros
- Low barrel grip for close steering
- Brushless 20V MAX design
- Speed dial and four orbital positions
- LED and dust blower
- Keyless blade clamp and bevel detents
Cons
- Battery and charger are not included
- Dial and switch operation differs from a squeeze-trigger saw
The DEWALT DCS335B is the best dewalt barrel grip in this comparison. Its barrel grip; brushless motor; led make it worth considering when those features match your next project.
To buy this product, click here.
6. Makita XVJ02Z — Best LXT Brushless Option
The XVJ02Z is a brushless top-handle LXT saw with a six-position dial spanning 800–3,500 strokes per minute. The range is useful when a project alternates between fast wood cuts and more deliberate detail work. Three orbital positions plus straight cutting adjust the action at the blade. Its tool-less clamp avoids hunting for a wrench when changing material-specific blades. The 18V LXT platform suits a shop already using Makita cordless tools, while the top handle gives a familiar grip for panel cutouts and longer curves.
The six-position dial is convenient when moving between different metal thicknesses with the appropriate blades. Keep the work clamped close to the line to reduce vibration.
Pros
- Brushless 18V LXT motor
- Six-position speed dial
- 800–3,500 SPM range
- Tool-less blade changes
- Three orbital positions plus straight cutting
Cons
- Battery and charger are not included
- Extraction needs a separate nozzle and compatible hose
The Makita XVJ02Z is the best lxt brushless option in this comparison. Its brushless motor; six-speed dial; tool-less blades make it worth considering when those features match your next project.
To buy this product, click here.
7. Makita 4350FCT — Best Corded Makita with Lighting
The 4350FCT is a 6.3-amp corded top-handle saw with electronic variable-speed control from 800–2,800 strokes per minute. It offers three orbital positions plus straight cutting and a tool-less tang-shank blade clamp. An LED illuminates the work at the shoe, while the die-cast aluminum base tilts left or right for bevels. The speed dial suits cuts where you want a steady setting rather than varying the trigger pressure. An onboard hex wrench handles base adjustments, which makes it easier to keep the setup tool with the saw.
The LED helps reveal a scratched or marked line, while the electronic dial establishes the working speed. Clear chips as needed without reaching into the blade path.
Pros
- 6.3-amp corded motor
- Electronic variable-speed control
- LED at the cutting area
- Tool-less blade changes
- Die-cast base with left and right bevel adjustment
Cons
- Base adjustment uses a hex wrench
- Extraction nozzle and hose are optional extras
The Makita 4350FCT is the best corded makita with lighting in this comparison. Its led; electronic speed control; tool-less clamp make it worth considering when those features match your next project.
To buy this product, click here.
8. Milwaukee 2737B-20 M18 FUEL — Best for M18 Barrel-Grip Users
The 2737B-20 uses a brushless M18 FUEL motor in a barrel-grip body. Its six-speed dial reaches 3,500 strokes per minute and includes an automatic start mode for a controlled approach to the cut. Four orbital settings change the cutting action, and LED lighting helps reveal the line. The T-shank clamp releases blades without a separate tool. A switchable blower can be turned off for vacuum use, and the included dust tube and cover provide a practical starting point for extraction.
The dial and low grip suit controlled layout cuts on supported stock. Set the orbital action conservatively and select a blade rated for the particular metal.
Pros
- Brushless M18 FUEL platform
- Low barrel grip
- Six-speed dial with automatic start mode
- LED and switchable blower
- Dust tube and cover included
Cons
- Battery and charger are not included
- Dust attachment cannot be used with batteries larger than 5.0Ah
The Milwaukee 2737B-20 M18 FUEL is the best for m18 barrel-grip users in this comparison. Its brushless barrel grip; six-speed dial; dust tube make it worth considering when those features match your next project.
To buy this product, click here.
9. BOSCH GST18V-50N — Best Bosch 18V Top Handle
The GST18V-50N is a brushless top-handle saw for the Bosch 18V platform. A trigger and speed dial let you tailor the blade speed up to 3,500 strokes per minute, while four orbital positions cover straight-action and more aggressive cutting. Its tool-less T-shank clamp makes material changes straightforward. An LED and blower help expose the marked line, and the die-cast footplate supports the tool across a panel. A no-mar overshoe is useful when the finished face must remain free of shoe scratches.
The trigger and dial provide flexible control for portable metal work. Start gently in thin sheet and keep the shoe supported to reduce chatter at the entry point.
Pros
- Brushless Bosch 18V platform
- Trigger and speed dial
- LED and blower
- Tool-less T-shank clamp
- Die-cast footplate with no-mar overshoe
Cons
- Battery and charger are sold separately
- Full-size 18V setup is larger than a compact 12V saw
The BOSCH GST18V-50N is the best bosch 18v top handle in this comparison. Its brushless motor; 3,500 spm; led make it worth considering when those features match your next project.
To buy this product, click here.
Buying Guide
Match teeth to metal thickness
Choose a blade rated for the alloy and thickness, with enough teeth engaged to avoid snagging. Aluminum, mild steel, and stainless steel may need different blades.
Use controlled blade action
Straight action is the usual starting point for thin metal. Follow the blade and tool instructions for speed and any permitted cutting lubricant.
Use the steps for how to cut metal with a jigsaw to plan clamping, blade action and feed before starting the job.
Clamp near the cut
Thin sheet can vibrate and distort. Support it close to the line, leaving clearance below for the entire blade stroke.
Respect capacity limits
Maximum capacity depends on material, blade, and model. A long blade does not increase a saw’s rated cutting capacity.
Frequently Asked Questions
Do these listings include metal blades?
Package contents vary. Buy a blade specifically rated for the metal and thickness rather than assuming the included blade is suitable.
Can I use orbital action on sheet metal?
Begin with straight action for thin sheet and follow the blade maker’s guidance. Aggressive orbital action can increase snagging and roughness.
Will the same blade cut stainless steel?
Not necessarily. Use a blade specifically rated for stainless steel and follow its speed and thickness recommendations.
Final Verdict
BOSCH JS470E is the best corded starting point pick. The dial and trigger help establish a deliberate start in supported sheet. Select a fine-tooth metal blade and straight action for thin metal rather than relying on aggressive orbital movement.
For dewalt cordless top handle, consider DEWALT DCS334B. Trigger control is useful for short notches and intermittent installation cuts. Secure the metal so it cannot chatter, and use the speed dial to avoid an unnecessarily fast blade.
